Seco 74069658 Turning Insert, ANSI Code: DNMP441-MF1 890, DNMG Insert, Material Grade: S, 150604 Insert, Diamond Shape, 15 Seat, Negative Rake, Neutral Cutting, For Use On Super Alloys and Titanium, Carbide, Manufacturer's Grade: 890
SECO 74069658
$19.82
/ Order multiples of 10 EA
Out of Stock
- Finish/Coating: Uncoated
- Insert Style: DNMG
- Insert Size: 150604
- Material: Carbide
- Length: 15 mm
- Thickness: 6.35 in
- Corner Radius: 0.4 in
- Manufacturer's Grade: 890
- Capacity: 8 mm
- Chipbreaker: MF1
- Cutting Direction: Neutral
- Finish: Uncoated
- Hole Diameter - Decimal: 0.20275 in
- Hole Diameter - Metric: 5.15 mm
- Included Angle: 55 deg
- Inscribed Circle - Metric: 12.7 mm
- Inscribed Circle Size: 12.7 mm
- Material Grade: S
- Maximum Depth of Cut: 5.25 in
- Rake: Negative
- Relief Angle: 0 deg
- Seat Size: 15
- Shape: Diamond
- Type: Negative;Basic Shape
- Width: 15 mm
- WP chipbreaker - dual dot structure with one dot offering stabilized chip control at low feed rates, while a second dot controls chips at higher feed rates
- Sharp edge
- PR1225 grade superior wear and oxidation resistant MEGACOAT on micrograin carbide substrate
- Light interrupted to interrupted cutting of stainless steel
Medium and Finishing
Seco Turning Insert | DNMG Insert | 150604 Insert | Diamond Shape | 5.25 mm Maximum Depth of Cut | 12.7 mm Inscribed Circle | 6.35 mm Thickness | 15 Seat | Negative Rake | MF1 Chipbreaker | 0.4 mm Corner Radius | 5.15 mm Diameter Hole | Manufacturer's Grade: 890 | ANSI Code: DNMP441-MF1 890 | ISO Code: DNMG150604-MF1 890 | 55 deg Included Angle | 0 deg Relief Angle | Neutral Cutting Direction | Carbide | Uncoated | Material Grade: S | For Use On: Super Alloys and Titanium