SGS 32608 V-Carb™ 55CR Center Cutting High Performance Positive Rake Single End End Mill, 5/32 in Dia Cutter, 0.01 in Corner Radius, 5/16 in Length of Cut, 5 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

The V-Carb end mill is the finishing touch that you can expect more from. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. Tackle a range of applications with this tool.

• Variable pitch combined with an odd number of flutes suppresses chatter and produces better surface finishes
• Rigid construction minimizes deflection and increases part accuracy
• Optimized tool geometry allows for improved shearing and decreased loads
• Can be run at higher production rates
• Tool holders with adequate gripping pressure are required
• Stub length solid holders are recommended for heavy stock removal
• Avoid remilling chips
• Set-up rigidity critical during heavy roughing
• Regrind and recondition services are available from SGS tool company
• External coolant
• Positive rake angle
• Unequal flute spacing
• Solid carbide provides better rigidity than high speed steel
• It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials
• Applicable materials: steels, stainless steels, cast iron, high temp alloys and titanium
• =0/-0.002 in D1, H6 D2 tolerances
• 0.01 in corner radius

Application: Aerospace, Medical, Power Generation, Automotive, Mold and Die, Castings and Foundries, General Engineering

SGS® High Performance End Mill | Corner Radius Medium Length Single End | Series: V-Carb™ | 55CR | 5/32 in Cutter Dia | 2 in Overall Length | 5/16 in Maximum Depth of Cut | 5 Flutes | Spiral Flute | 3/16 in Shank Dia | Right Hand Cutting | 45 deg Helix Angle | Straight Shank | Micrograin Solid Carbide | AlTiN Coated