SGS 32667 V-Carb™ 55 High Performance Medium Length Square End Variable Geometry End Mill, 5/8 in Dia Cutter, 1-5/8 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, AlTiN Coated
- Centercutting: No Center Cutting
- Mill Diameter: 5/8 in
- Number of Flutes: 5
- Length of Cut: 1-5/8 in
- Material: Micrograin Solid Carbide
- Finish/Coating: AlTiN Coated
- Shank Diameter: 5/8 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.87 mm
- Single or Double End: Single End
- Overall Length: 3-1/2 in
- Cutting Direction: Right Hand
- Helix Angle: 45 deg
- Cutter Diameter: 5/8 in
- Diameter: 0.625 in
- Finish: AlTiN
- Length of Cut - Fractional: 1-5/8 in
- Overall Length - Fractional: 1/2 in
- Series: V-Carb™ 55
- Shank Type: Straight/Weldon Flat
- Type: High Performance Medium Length Square End Variable Geometry
- Flute Type: Spiral
- Cutter Diameter - Fractional: 5/8 in
- Diameter - Decimal: 0.625 in
The V-Carb end mill is the finishing touch that you can expect more from. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. Tackle a range of applications with this tool.
- Variable pitch combined with an odd number of flutes suppresses chatter and produces better surface finishes
- Rigid construction minimizes deflection and increases part accuracy
- Optimized tool geometry allows for improved shearing and decreased loads
- Positive rake angle
- External coolant
- Flute spacing unequal
- Applicable materials: steels, stainless steels, cast iron, high temp alloys and titanium
Application: Aerospace, Medical, Power Generation, Automotive, Mold and Die, Castings and Foundries and General Engineering
SGS® High Performance End Mill | Medium Length Variable Geometry Square End | Series: V-Carb™ | 55 | 5/8 in Cutter Dia | 3-1/2 in Overall Length | 1-5/8 in Maximum Depth of Cut | 5 Flutes | Spiral Flute | 5/8 in Shank Dia | Right Hand Cutting | 45 deg Helix Angle | Straight/Weldon Flat Shank | Micrograin Solid Carbide | AlTiN Coated