SUMITOMO
Sumitomo 5VHY414 0.0790 Solid Carbide Screw Machine Drill
SUMI 5VHY414
$108.36
/ EA
Out of Stock
- Shank Type: Cylindrical
- Overall Length: 2.4803 in
- Flute Length: 0.4921 in
- Shank Diameter - Decimal: 0.1181 in
- Shank Length: 1.8898 in
Sumitomo's GS (Global Standard) solid carbide drills are available in 2XD and 4XD lengths, and 3XD, 5XD and 8XD lengths in coolant through geometries. While each GS drill series has a recommended depth to diameter ratio, in most cases the GS drill offers extra flute length for deeper drilling. This results in more drill for your money as well as savings due to the number of regrinds possible. As with any drilling application, always check for sufficient flute length before drilling. Sumitomo recommends leaving at least one drill diameter outside of the hole for proper chip evacuation.
- The new PVD DEX coating provides extreme wear resistance and heat resistance
- With greater heat and wear resistance in a coating comes the capability of increasing cutting speeds - Up to 30% greater than conventional carbide drills
- The GS Drill also has a unique thinning design that promotes stable drilling thereby increasing tool life and improving tool repeatability
- The GS Series employs a wider J-flute geometry to help evacuate chips quickly while drilling.
Standard/Approvals:MDW0200HGS3
Sumitomo Electric Carbide 5VHY414 0.0787 in | 135 Degree | 0.0163 in | Solid Carbide | Screw Machine Length Drill Bit