TECHNIKS 33256G Milling Chuck With CoolBLAST Coolant Through Channel, HSK100A Taper, 1-1/4 in Dia Hole, 2.79 in Dia Nose, 4.72 in Projection
- Nose Diameter: 2.79 in
- Body Diameter: 2.95 in
- Bore Diameter: 1.25 in
- Projection Length: 4.72 in
- Taper: HSK100A
- Weight: 8
Techniks HSK Milling Chucks provide up to 5X the gripping force of other manufacturer’s ER40 holders to meet the most demanding, high material removal rate applications such as heavy milling of titanium or other high-temp alloys. The nut is designed to sit flush against the flange when properly tightened preventing damage to the bearing assembly from over-tightening. A machined bearing cage and high precision, individually matched needle bearings symmetrically placed provide smooth, reliable operation. All Techniks Milling Chucks are designed with CoolBLAST coolant grooves in the I.D. bore to direct coolant to the cutting area and assist with chip evacuation. Coolant discs can be used to seal around the tool shank for coolant-through cutting tools. Reduction sleeves can be used to hold almost any shank diameter.
- Grips shank up to 5x tighter than ER 40 collet chucks
- Special slotted design of bore I.D. increases holding power and reduces vibration
- CoolBLAST coolant-thru standard on all milling chucks
Techniks 33256G Taper Size HSK100A | Shank Type Tapered | Hole Dia 1-1/4 in | Nose Diaeter 2.7900 in | Projection 4.7200 in | Milling Chuck