Techniks

Techniks SYIC-15995G Taper Size BT40, Hole Dia 1.0000 in, Nose Diaeter 2.3600 in, Milling Chuck

TECHNK SYIC-15995G
$388.80 / EA
Out of Stock
Image for TECHNK SYIC-15995G

Techniks HSK Milling Chucks provide up to 5X the gripping force of other manufacturer’s ER40 holders to meet the most demanding, high material removal rate applications such as heavy milling of titanium or other high-temp alloys. The nut is designed to sit flush against the flange when properly tightened preventing damage to the bearing assembly from over-tightening. A machined bearing cage and high precision, individually matched needle bearings symmetrically placed provide smooth, reliable operation. All Techniks Milling Chucks are designed with CoolBLAST coolant grooves in the I.D. bore to direct coolant to the cutting area and assist with chip evacuation. Coolant discs can be used to seal around the tool shank for coolant-through cutting tools. Reduction sleeves can be used to hold almost any shank diameter.

  • Grips shank up to 5x tighter than ER 40 collet chucks
  • Special slotted design of bore I.D. increases holding power and reduces vibration
  • CoolBLAST coolant-thru standard on all milling chucks

Techniks SYIC-15995G Taper Size BT40 | Hole Dia 1.0000 in | Nose Diaeter 2.3600 in | Projection 3.1400 in | Milling Chuck

QTY
Add to List