YG-1 GYG70020 Center Cut Multi-Flute Roughing-Coarse Square End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 3 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, AlCrN Coated
YG1 GYG70020
$35.01
/ EA
Out of Stock
- Mill Diameter: 5/16 in
- Mill Diameter - Decimal: 0.3125 in
- Mill Diameter - Fractional: 5/16 in
- Mill Diameter - Metric: 7.9375 mm
- Pitch: Coarse
- Length of Cut: 3/4 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- End Type: Corner Chamfer
- Material: PM60
- Finish/Coating: Y Coating
- Overall Length: 2-1/2 in
- Centercutting: Center Cutting
- Helix Angle: 30 deg
- Corner Radius: 0.014 in
- Length of Cut - Decimal: 0.75 in
- Length of Cut - Fractional: 3/4 in
- Length of Cut - Metric: 19.05 mm
- Number of Flutes: 3
- Overall Length - Decimal: 2.5 in
- Overall Length - Fractional: 2-1/2 in
- Overall Length - Metric: 63.5 mm
Multi Flute Roughing- Coarse (Center Cut) Pm60 - Gyg70
Yg-1 Cutting Tools Gyg70020 5/16 In Diam | 3/4 In Loc | 3 | Roughing End Mill